Rinnai Tankless Water Heater · SENSEI series · SENSEI RX/CX series · Non-SENSEI series

52Gas Valve

The gas valve or modulating solenoid isn't responding correctly.

Difficulty
Technician
Safety
Call a pro
Source
Confirmed by manufacturer
Last checked
2026-11-21
Safety: Involves gas, venting, refrigerant or electrical parts. Do the basic checks only, then call a licensed technician.

How to fix Rinnai code 52

  1. Reset: turn off hot water taps and press ON/OFF on the controller twice
  2. If the code comes back, call a licensed Rinnai service provider

What 52 means on your Rinnai

Code 52 points to the gas valve (on Non-SENSEI models, the modulating solenoid valve). There are no homeowner fixes beyond resetting the heater.

What a technician will check: the flame rod and its wiring, the gas solenoid harness, and the solenoid's resistance or voltage at the control board. If the valve is replaced, Rinnai's guide gives a reset procedure, and says to contact Rinnai technical support if the code won't clear.

Likely causes

  • Loose or damaged flame rod or wiring
  • Damaged gas solenoid terminals
  • Failed gas valve

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.