Safety: Turn the power off before any checks inside the unit.
How to fix Rinnai code 25
- Make sure the condensate pump is plugged in and has power
- Make sure the condensate drain line isn't clogged, kinked or frozen
- Make sure the drain line has an air gap
- Reset: turn off hot water taps and press ON/OFF on the controller twice
- If the code comes back, call a licensed Rinnai service provider
What 25 means on your Rinnai
Code 25 relates to an external (third-party) condensate pump or the condensate drain.
Rinnai's checks: power to the pump, that the pump runs, that the drain line isn't clogged or frozen, the wiring from the pump and condensate trap back to the control board, and an air gap in the drain line.
Likely causes
- Pump has no power
- Pump failed
- Drain line clogged or frozen
- Missing air gap in the drain line
Sources
- Rinnai: Troubleshooting Tankless Water Heater Diagnostic Codes (doc. 100000652) manufacturer checked 2026-11-21
Spotted an error on this page? Report it and we'll re-check it against the manual.