Safety: Involves gas, venting, refrigerant or electrical parts. Do the basic checks only, then call a licensed technician.
How to fix Rinnai code 16
- Check the outside vent terminal for snow, leaves, nests or anything blocking it
- Reset: turn off hot water taps and press ON/OFF on the controller twice
- If the code comes back, call a licensed Rinnai service provider
What 16 means on your Rinnai
Code 16 is a high-temperature safety shutdown at 203 °F / 95 °C outlet water temperature.
What a technician will check: airflow around the vent terminal, fan operation and the check valve behind the fan, foreign material in the combustion chamber and exhaust, blockage in the heat exchanger, and the gas type setting. Rinnai lists the gas valve or fan assembly as the parts to replace if those checks pass.
Likely causes
- Restricted airflow at the vent terminal
- Combustion fan problem
- Blocked heat exchanger
- Debris in the combustion chamber or exhaust
- Wrong gas type setting
Sources
- Rinnai: Troubleshooting Tankless Water Heater Diagnostic Codes (doc. 100000652) manufacturer checked 2026-11-21
Spotted an error on this page? Report it and we'll re-check it against the manual.