Goodman Furnace · GM9S single-stage 92%/96% furnaces

EE4Flame Detected When No Flame Should Be Present

The control senses a flame with the gas valve off, so it runs the blowers continuously and stops normal operation.

Difficulty
Technician
Safety
Call a pro
Source
From a service manual
Last checked
2026-11-21
Safety: Involves gas, venting, refrigerant or electrical parts. Do the basic checks only, then call a licensed technician.

How to fix Goodman code EE4

  1. Turn off the gas to the furnace
  2. Gas and ignition repairs are for a licensed HVAC technician

What EE4 means on your Goodman

EE4 is a safety condition: the furnace thinks there's a flame when the gas should be off. Goodman lists a short in the flame sensor circuit, a lingering burner flame, or a slow-closing gas valve.

Because a gas valve that doesn't close properly is a safety hazard, have a technician inspect it promptly.

Likely causes

  • Short to ground in the flame sense circuit
  • Lingering burner flame
  • Slow-closing gas valve

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.