Goodman Furnace · GMVC96 two-stage variable-speed furnaces

E3Open Primary, Auxiliary or Rollout Limit

A limit switch opened because of overheating. The blowers run until it closes.

Difficulty
Easy
Safety
Use caution
Source
From a service manual
Last checked
2026-11-21
Safety: Turn the power off before any checks inside the unit.

How to fix Goodman code E3

  1. Replace or clean the furnace air filter and make sure supply and return vents are open
  2. Reset: turn the thermostat off for 5–20 seconds and back on, or switch off power to the furnace for at least 5 seconds
  3. If the code returns, call a licensed HVAC technician

What E3 means on your Goodman

Goodman lists low airflow (a dirty filter or ductwork resistance) first, then a faulty limit, faulty blower, low blower speed setting, misaligned burners, a faulty induced draft blower or a blocked flue.

If it's a rollout limit that opened, don't keep resetting it; have a technician inspect the burners and flue.

Likely causes

  • Dirty filter or restrictive ductwork
  • Blower speed set too low or faulty blower
  • Misaligned burners
  • Faulty inducer or blocked flue
  • Faulty limit

Parts and supplies for this fix

We may earn a commission from purchases made through these links. Confirm the part matches your exact model number before buying.

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.