Goodman Furnace · GMVC96 two-stage variable-speed furnaces

E7Check Igniter or No Ground Condition

The igniter is broken or improperly connected, or the furnace isn't properly grounded.

Difficulty
Technician
Safety
Call a pro
Source
From a service manual
Last checked
2026-11-21
Safety: Involves gas, venting, refrigerant or electrical parts. Do the basic checks only, then call a licensed technician.

How to fix Goodman code E7

  1. Reset: turn the thermostat off for 5–20 seconds and back on, or switch off power to the furnace for at least 5 seconds
  2. If the code returns, call a licensed HVAC technician

What E7 means on your Goodman

Goodman's instructions for E7: check for a broken or improperly connected igniter, and check for a proper ground and correct it. Hot surface igniters are fragile and do wear out.

Likely causes

  • Broken or disconnected igniter
  • Poor ground

Parts and supplies for this fix

We may earn a commission from purchases made through these links. Confirm the part matches your exact model number before buying.

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.