Navien Tankless Water Heater · NPE-A2 series · NPE-S2 series

Navien Valve, Flow & Limit Error Codes (E031, E046, E434, E439, E445, E785)

These codes report a problem with a valve, flow sensor or safety limit inside the heater, or burner overheating. Navien's manual directs owners to contact technical support for each of them.

Safety: Involves gas, venting, refrigerant or electrical parts. Do the basic checks only, then call a licensed technician.

E031Overheating of Burner

The burner area overheated and the heater shut down.

  1. Press the Back button on the front panel to reset the water heater
  2. If the code comes back: contact Navien Technical Support (1-800-519-8794) or a licensed technician

Also shown as: 031, E-031 · Confirmed by manufacturer · checked 2026-11-20

E046Abnormal Operation: Limit Control

A high-limit safety control tripped or is reporting a fault.

  1. Press the Back button on the front panel to reset the water heater
  2. If the code comes back: contact Navien Technical Support (1-800-519-8794) or a licensed technician

Also shown as: 046, E-046 · Confirmed by manufacturer · checked 2026-11-20

E434Abnormal Operation: Water Adjustment Valve

The valve that regulates water flow through the heater is not operating normally.

  1. Press the Back button on the front panel to reset the water heater
  2. If the code comes back: contact Navien Technical Support (1-800-519-8794) or a licensed technician

Also shown as: 434, E-434 · Confirmed by manufacturer · checked 2026-11-20

E439Abnormal Operation: Flow Sensor

The water flow sensor is not reporting normally.

  1. Press the Back button on the front panel to reset the water heater
  2. If the code comes back: contact Navien Technical Support (1-800-519-8794) or a licensed technician

Also shown as: 439, E-439 · Confirmed by manufacturer · checked 2026-11-20

E445Abnormal Operation: Bypass Mixing Valve

The bypass mixing valve is not operating normally.

  1. Press the Back button on the front panel to reset the water heater
  2. If the code comes back: contact Navien Technical Support (1-800-519-8794) or a licensed technician

Also shown as: 445, E-445 · Confirmed by manufacturer · checked 2026-11-20

E785Abnormal Operation: Flow Switch/sensor (If an Air Handler Is Installed)

On systems with an air handler (AHU), the flow switch or sensor is not reporting normally.

  1. Press the Back button on the front panel to reset the water heater
  2. If the code comes back: contact Navien Technical Support (1-800-519-8794) or a licensed technician

Also shown as: 785, E-785 · Confirmed by manufacturer · checked 2026-11-20

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.