Navien Tankless Water Heater · NPE-A2 series · NPE-S2 series

Navien Gas Type Error Codes (E773, E788)

Both codes mean the heater's gas type setting doesn't match the gas it is receiving or its own configuration. Gas conversion and gas settings must be handled by a qualified installer.

Safety: Involves gas, venting, refrigerant or electrical parts. Do the basic checks only, then call a licensed technician.

E773Using the Wrong Gas

The heater detected that it is running on a different gas type than it is set up for.

  1. Press the Back button on the front panel to reset the water heater
  2. If the code comes back: contact Navien Technical Support (1-800-519-8794) or a licensed technician

Also shown as: 773, E-773 · Confirmed by manufacturer · checked 2026-11-20

E788Abnormal Operation: Gas Type Mismatch Between Panel and DIP Switch Setting

The gas type set on the front panel doesn't match the DIP switch setting.

  1. Check which gas is supplied, then match the gas type setting on the panel and the DIP switch (have a qualified installer do this)
  2. Press the Back button on the front panel to reset the water heater
  3. If the code comes back: contact Navien Technical Support (1-800-519-8794) or a licensed technician

Also shown as: 788, E-788 · Confirmed by manufacturer · checked 2026-11-20

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.