Navien Tankless Water Heater · NPE-A2 series · NPE-S2 series

E003Ignition Failure

The burner tried to light but didn't ignite, so the heater locked out and stopped making hot water.

Difficulty
Technician
Safety
Call a pro
Source
Confirmed by manufacturer
Last checked
2026-11-20
Sources disagree. Navien's manual lists E003 as ignition failure. One UK boiler site describes 003 as a water-pressure fault; that does not apply to NPE water heaters.
Safety: Involves gas, venting, refrigerant or electrical parts. Do the basic checks only, then call a licensed technician.

How to fix Navien code E003

  1. Make sure the main gas supply valve to the heater is open
  2. Press the Back button on the front panel to reset the water heater
  3. If the code comes back: contact Navien Technical Support (1-800-519-8794) or a licensed technician

What E003 means on your Navien

On an NPE water heater, E003 appears when the burner fails to light during start-up. The first thing Navien asks owners to check is that the main gas supply valve to the heater is open.

If other gas appliances in the home also aren't working, the problem is likely the gas supply rather than the heater. Contact your gas utility.

Never try to light the heater by hand, and if you smell gas, leave the building and call your gas supplier from outside, as the manual's safety warning instructs.

Likely causes

  • Main gas supply valve closed
  • Gas supply interrupted
  • Ignition component fault (technician diagnosis)

Common questions

Can I reset a Navien E003 error?

Yes. Press the Back button on the front panel. If the burner still won't light, check the gas valve and call support rather than resetting repeatedly.

Is E003 covered by warranty?

Component failures can fall under Navien's limited warranty (parts are covered for 5 years on residential NPE installations). A gas supply problem is not a heater defect.

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.