How to fix Carrier code 14
- Make sure the manual gas shut-off valve to the furnace is on
- Reset: switch the furnace power off for a few seconds and back on
- If the code returns, call a licensed HVAC technician
What 14 means on your Carrier
Code 14 follows repeated code 34 failures: after three more tries, the control locks out. Carrier says it auto-resets after three hours and refers to code 34's checklist (flame sensor, gas valve, gas pressure, igniter).
If you smell gas, don't reset it; leave and call your gas supplier.
Count the flashes: the first digit is the number of short flashes, the second the number of long flashes.
Likely causes
- Gas valve or manual shut-off off
- Dirty flame sensor
- Low inlet gas pressure
- Defective hot surface igniter
Parts and supplies for this fix
- Carrier flame sensorCheck price
- Carrier hot surface igniterCheck price
We may earn a commission from purchases made through these links. Confirm the part matches your exact model number before buying.
Sources
- Carrier 59SC5B Installation, Start-up, Operating & Service Instructions (59SC5B-05SI), service label manufacturer checked 2026-11-21
Spotted an error on this page? Report it and we'll re-check it against the manual.