Carrier Furnace · 59SC5B single-stage condensing furnaces

12Blower on After Power Up

The blower runs for 90 seconds because power came on during a call for heat, or the heat call ended during the blower on-delay.

Difficulty
Easy
Safety
Safe to check
Source
Confirmed by manufacturer
Last checked
2026-11-21
Safety: Safe to check yourself.

How to fix Carrier code 12

  1. Usually no action needed: the blower stops after about 90 seconds
  2. If it happens often, have the power supply and thermostat wiring checked

What 12 means on your Carrier

Code 12 is informational. Carrier's label explains the blower runs for 90 seconds if the unit is powered up during a call for heat or if the heat call (R-W) opens during the blower on-delay. Frequent code 12s can point to power interruptions or a loose thermostat connection.

Count the flashes: the first digit is the number of short flashes, the second the number of long flashes.

Likely causes

  • Power restored while the thermostat was calling for heat
  • Thermostat call ended during blower on-delay

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.