Carrier Furnace · 59SC5B single-stage condensing furnaces

21Gas Heating Lockout

A gas valve circuit fault locked the furnace out. It will NOT auto-reset.

Difficulty
Technician
Safety
Call a pro
Source
Confirmed by manufacturer
Last checked
2026-11-21
Safety: Involves gas, venting, refrigerant or electrical parts. Do the basic checks only, then call a licensed technician.

How to fix Carrier code 21

  1. Turn off the furnace
  2. If the code returns, call a licensed HVAC technician

What 21 means on your Carrier

Carrier's label says code 21 does not auto-reset and lists a mis-wired gas valve or a defective control (valve relay). It needs a technician; it often appears after a gas valve or control board was replaced.

Count the flashes: the first digit is the number of short flashes, the second the number of long flashes.

Likely causes

  • Mis-wired gas valve
  • Defective control (valve relay)

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.