Carrier Furnace · 59SC5B single-stage condensing furnaces

45Control Circuitry Lockout

The control locked out for an internal reason: gas valve relay stuck open, flame sense circuit failure or a software check error. It auto-resets after one hour.

Difficulty
Technician
Safety
Call a pro
Source
Confirmed by manufacturer
Last checked
2026-11-21
Safety: Involves gas, venting, refrigerant or electrical parts. Do the basic checks only, then call a licensed technician.

How to fix Carrier code 45

  1. Reset: switch the furnace power off for a few seconds and back on
  2. If code 45 repeats, the control board needs replacing by a technician

What 45 means on your Carrier

Carrier's label: reset power to clear the lockout, and replace the control if the status code repeats.

Count the flashes: the first digit is the number of short flashes, the second the number of long flashes.

Likely causes

  • Gas valve relay stuck open
  • Flame sense circuit failure
  • Software check error

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.