Rheem Tankless Water Heater · RTGH-S condensing tankless (IKONIC)

A011Flame Not Detected From Flame Rod

Ignition failed: the heater tried to light 10 times without detecting a flame.

Difficulty
Technician
Safety
Call a pro
Source
From a service manual
Last checked
2026-11-21
Safety: Involves gas, venting, refrigerant or electrical parts. Do the basic checks only, then call a licensed technician.

How to fix Rheem code A011

  1. Make sure the gas shut-off valve to the heater is fully open
  2. Check that other gas appliances work; if not, contact your gas utility
  3. If the code is still shown, note it and call a qualified service technician

What A011 means on your Rheem

Rheem's service manual says the heater attempts ignition 10 times (with a post-purge every 3 tries) before showing A011.

What a technician will check: gas supply pressure (natural gas 4.0–10.5 in. w.c., propane 8.0–13.0 in. w.c.), pressure drop when other gas appliances run, the regulator, and the igniter and flame rod.

Likely causes

  • Gas supply valve closed or low gas pressure
  • Igniter or flame rod problem
  • Gas filter or supply issue

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.