Navien Combi Boiler · NCB-H combi-boilers

E016Heat Exchanger Overheat

The heat exchanger overheated, often because scale is restricting flow.

Difficulty
Moderate
Safety
Use caution
Source
Confirmed by manufacturer
Last checked
2026-11-21
Safety: Turn the power off before any checks inside the unit.

How to fix Navien code E016

  1. Turn the boiler off for at least 30 minutes, then restart it
  2. Flush the heat exchanger (see the manual)
  3. If the code comes back: contact a licensed technician or Navien Technical Support (1-800-519-8794)

What E016 means on your Navien

Navien's remedies for E016 are to turn the system off for at least 30 minutes and restart, then flush the heat exchanger.

Flushing an NCB-H needs flush valves on the near-boiler piping (included with the Navien Manifold System), a 5-gallon bucket, diluted cleaning solution and a circulation pump. Navien calls it "a somewhat complicated procedure": if you're unsure, have a technician do it.

Likely causes

  • Scale build-up in the heat exchanger
  • Restricted water flow

Parts and supplies for this fix

We may earn a commission from purchases made through these links. Confirm the part matches your exact model number before buying.

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.