Navien Combi Boiler · NCB-H combi-boilers

E012Flame Loss

The burner lit, then the flame went out while the boiler was running.

Difficulty
Moderate
Safety
Use caution
Source
Confirmed by manufacturer
Last checked
2026-11-21
Safety: Turn the power off before any checks inside the unit.

How to fix Navien code E012

  1. Clean the air intake filter (Navien recommends every 3–4 months)
  2. Make sure the power cord is plugged into a properly grounded outlet
  3. Reset the boiler: press the Back button on the front panel
  4. If the code comes back: contact a licensed technician or Navien Technical Support (1-800-519-8794)

What E012 means on your Navien

Navien's remedies for E012 are cleaning the air intake filter and confirming the power cord is properly grounded. The manual recommends cleaning the air intake filter every 3–4 months: turn the boiler off at the Power button, disconnect power, remove the filter, clean and dry it, and refit it.

Likely causes

  • Dirty air intake filter
  • Improper electrical grounding

Parts and supplies for this fix

We may earn a commission from purchases made through these links. Confirm the part matches your exact model number before buying.

Sources

Spotted an error on this page? Report it and we'll re-check it against the manual.