E517Abnormal DIP Switch
The DIP switch configuration isn't valid.
- Reset the boiler: press the Back button on the front panel
- If the code comes back: contact a licensed technician or Navien Technical Support (1-800-519-8794)
Also shown as: 517, E-517 · Confirmed by manufacturer · checked 2026-11-21
E594Abnormal EEPROM
The control's memory chip reported a fault.
- Reset the boiler: press the Back button on the front panel
- If the code comes back: contact a licensed technician or Navien Technical Support (1-800-519-8794)
Also shown as: 594, E-594 · Confirmed by manufacturer · checked 2026-11-21
E615Abnormal Memory
The control reported a memory fault.
- Reset the boiler: press the Back button on the front panel
- If the code comes back: contact a licensed technician or Navien Technical Support (1-800-519-8794)
Also shown as: 615, E-615 · Confirmed by manufacturer · checked 2026-11-21
E736Cascade Communication
In a multi-boiler (cascade) system, the boilers can't communicate.
- Reset the boiler: press the Back button on the front panel
- If the code comes back: contact a licensed technician or Navien Technical Support (1-800-519-8794)
Also shown as: 736, E-736 · Confirmed by manufacturer · checked 2026-11-21
E761Pump Aquastat Not Detected
The pre-heat aquastat the boiler is set to use isn't detected.
- Check the pre-heat aquastat wiring connection
- Or select an option other than Aquastat mode
- Reset the boiler: press the Back button on the front panel
- If the code comes back: contact a licensed technician or Navien Technical Support (1-800-519-8794)
Also shown as: 761, E-761 · Confirmed by manufacturer · checked 2026-11-21
E782Front Panel Communication
The front panel and main control can't communicate.
- Reset the boiler: press the Back button on the front panel
- If the code comes back: contact a licensed technician or Navien Technical Support (1-800-519-8794)
Also shown as: 782, E-782 · Confirmed by manufacturer · checked 2026-11-21
E784Zone Controller Communication
The boiler can't communicate with the zone controller.
- Reset the boiler: press the Back button on the front panel
- If the code comes back: contact a licensed technician or Navien Technical Support (1-800-519-8794)
Also shown as: 784, E-784 · Confirmed by manufacturer · checked 2026-11-21
E786Improper Front Panel
The front panel fitted isn't the correct one for this boiler.
- Reset the boiler: press the Back button on the front panel
- If the code comes back: contact a licensed technician or Navien Technical Support (1-800-519-8794)
Also shown as: 786, E-786 · Confirmed by manufacturer · checked 2026-11-21
Sources
- Navien NCB-H User's Information Manual v1.0 (Jan 2025), section 5.2, pp. 25-26 manufacturer checked 2026-11-21
Spotted an error on this page? Report it and we'll re-check it against the manual.